The steering wheel is the primary control component of your truck. Any problems with your steering will limit your truck’s manoeuvrability. Poor steering system performance can also increase driver fatigue. Truck drivers in Australia need efficient vehicles capable of covering long distances.
A commercial vehicle steering system consists of several components that work together to turn it left, right or keep it steady. The steering system components respond to the driver’s action. Advanced commercial vehicles incorporate driver assistance technology such as hydraulic and electric power steering systems.
Regular maintenance enhances the performance and lifespan of your truck. Using aftermarket parts for European trucks gives you access to high-quality components at affordable rates. This article highlights four common signs of steering wheel problems. Keeping note of these signs will enable you to avoid unplanned roadside failures and costly repairs. Read on if you would like to find out more about steering failure indicators.
Irregular noises when you are turning is one of the most common signs of a problem in your steering system. Such noises can be due to loose components, faulty or damaged mechanisms or unnecessary strain. For example, if you hear grinding noises, then this points to problems with your lubrication systems, while screeching noises when negotiating turns indicate that you need to adjust or replace your power steering belt.
Power steering fluid Leakage
If your power steering system needs constant fluid refills, you should alert your technician. Loss of this liquid points to a leakage in the system possibly due to loose clamps, worn out seals or mechanical damage.
Your power steering fluid also helps to lubricate your steering gears. If this fluid dries out during a long trip, it can cause costly damage to your steering gears, belts, hydraulic system and also your steering pump.
Your steering is likely to vibrate if it has loose connections, damaged bearings or faulty gears. Long term vibration causes driver discomfort and mechanical damage to internal steering components. Unpredictable steering vibrations can cause your truck to veer off its lane and cause accidents on the road.
If vibrating from your truck’s steering wheel persists, you should check your power steering system for impurities in addition to your wheels’ alignment and balance. Another thing that can cause steering vibration is unevenly worn out wheels.
Steering play refers to the ability to turn your steering wheel more than 2.5cm before the wheels respond. Steering play is dangerous because it can delay your truck’s reaction time in emergencies. Such delays limit the drivers’ ability to control the truck.
Several truck components can cause excessive steering delays if neglected. Below is a list of some of the components to service if you experience excessive play in your truck’s steering:
- Tie rod ends
- Ball joints
- Steering wheel rack and coupling
You should understand how your truck sounds and feels when in optimal condition. This awareness helps you identify and address faults quickly. Early detection and response to problems with your vehicle can save you a lot of time and money. In addition, readily available aftermarket parts for European trucks in Australia can significantly reduce your truck’s downtime.